1 / 6
Multi Part Potted Orchid (fusion360)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A potted orchid that can easily be printed in parts and thus multiple colors without an MMU
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (14)Powiązane
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily.
There are 2 stem variants, with and without leaves, that you can use interchangeably.
Printing information:
- Split the original model to its parts before printing each part separately
- You will need to use the original's model flower, soil and pot to complete the stem with leaves
- Print all parts upright, except maybe the soil, which I recommend printing upside down for a better surface when assembled
- Use regular adjusted supports for the soil and tree supports for the flower
- Use a brim to improve the bed adhesion of the small parts
Note that I am aware that this model doesn't have a typical orchid stem, but as a first attempt at an organically sculpted one, I am quite happy with the result.
---
Erratum (29/07/25): Addition of a new stem variant with leaves