4040 Extrusion Fence Dogs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily add a fence to your MFT by securing your 4040 aluminum extrusion to your tabletop for woodworking
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After creating my 2020 Fence Dogs (click to view), I wanted a bigger challenge and to expand on the idea of mounting aluminum extrusion for use as an MFT fence. So I printed some 4040 Extrusion and started testing!
After that, I thought… why stop there, so I also printed some 4080 Extrusion to make additional Fence Dogs!
It is a simple but versatile premise:
- Securely lock your 4040/4080 Extrusion to the Fence Dogs
- Insert the Fence Dogs into your MFT!
- (optional) Lock each Fence Dog to the MFT with a Hex Bolt placed inside the base and additional Knurled Knob (with Hex Nut) placed under your work surface :)
It is really that simple!
Beyond that, I have added a variety of Fence Dog base sizes, so you can find the one that works best for your MFT set up and dog holes (because every company has to do it slightly different).
So what hardware will you need?
| 4040 Fence Dog (per unit) | 4080 Fence Dog (per unit) | |
| 5/16 Hex Nuts | 1 | 2 |
| 5/16 T-Bolt | 1 | 2 |
| Optional Items | add 1 Hex Nut & 1 Hex Bolt (length varies based on which Fence Dog is used | |
Unlike my 2020 Fence Dogs, the 4040/4080 Fence Dogs do not require a pause mid-print to insert hardware. Simply print each piece and assemble!
- Slide in your 5/16 T-Bolt into the Extrusion
- Attach the Fence Dog to the T-Bolt
- Press your 5/16 Hex Nut into the Knurled Knob
- Secure the Fence Dog to the 4040 Extrusion with the Knurled Knob
Repeat as necessary.
PRINT INFO:
Layer Height: 0.20
Walls: 3-4
Infill: 20%-25% (I like to use Honeycomb)
Supports: None*
*All pieces can be easily printed without any supports. The main body of the Fence Dog should be printed upside down (with the round base at the top). I have created a staggered bridge for the overhang, allowing for zero supports being required