1 / 1
IKEA Lack - Caster Plate/Brace
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple model designed for the IKEA Lack in Fusion 360, allowing you to attach small casters to your table.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — NoDerivatives
A simple model designed for the IKEA Lack in Fusion 360, allowing you to attach small casters to your table. To use this model, you'll need the following items:
- 1.5 Inch Casters (Amazon.com) ← This model was designed for this exact product.
- #8 x 3/4" Pan Phillips Screws (or similar)
It's recommended that you print this model with PETG for added durability, however PLA/PLA+ will also work just fine.
To install the caster brace, thread in the 4 screws from the bottom of the print to attach the caster. Then, simply use two of the #8 x 3/4" screws to secure the brace on the sides of the IKEA lack table leg.