1 / 1
IKEA Lack - Caster Plate/Brace
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple model designed for the IKEA Lack in Fusion 360, allowing you to attach small casters to your table.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — NoDerivatives
A simple model designed for the IKEA Lack in Fusion 360, allowing you to attach small casters to your table. To use this model, you'll need the following items:
- 1.5 Inch Casters (Amazon.com) ← This model was designed for this exact product.
- #8 x 3/4" Pan Phillips Screws (or similar)
It's recommended that you print this model with PETG for added durability, however PLA/PLA+ will also work just fine.
To install the caster brace, thread in the 4 screws from the bottom of the print to attach the caster. Then, simply use two of the #8 x 3/4" screws to secure the brace on the sides of the IKEA lack table leg.