MamutTH K2 Plus hotend version ****UPDATE 05-2025****
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Out of the need for better flow and improved filament heating during high-speed printing, I decided to modify my print…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Out of the need for better flow and improved filament heating during high-speed printing, I decided to modify my print head to use the Creality K2 Plus hotend.
At the moment, I’m not satisfied with the X-axis tension—just like with the previous setup—and I’m also not happy with the mounting of the cooling ducts. However, the print head itself is working quite well, and I’m pleased with the results. Feel free to test it out! 😜
All parts were printed using Eryone ABS+.
https://youtube.com/shorts/VAXdNsujThU
For Klipper you need to add [thermistor my_thermistor] temperature1:25 resistance1:260000 temperature2:220 resistance2:738 temperature3:350 resistance3:98
however, with the value of resistance1:260000 the Klipper indicated a temperature of approximately 0 degrees at a room temperature of around 22C, I have set the value to 550000 which gives a similar value 22C to the standard thermistor.
**UPDATE 05-2025***** I am currently testing a PT1000 sensor in this head instead of the original one.UPDATE*** PT1000 is too slow...
Category: 3D Printer Extruders