Toyota 2E 1.3 L exhaust manifold flange.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flange for Toyota 2E engine exhaust manifold. If you have to rebuild yours.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
If you ever have to build a manifold to replace your cracked cast iron one, here is the flange. Just upload it to the steel machining service of your choice and weld some pipes.
I made it because i was not able to find a model anywhere. There is also a scan of the exhaust manifold seal.
Also mock up for a rounded edge rectangular to 34mm inner and 36mm outer diameter pipe for directly welding rest of your manifold. Might be possible to have it metal 3D printed.
Fits: (propably)
- Toyota Corolla/Toyota Sprinter EE80, EE90, EE96V, EE97G, EE100, EE110
- Toyota Starlet EP71, EP81, EP82 (2E-E,Si Version), EP90
- Toyota Starlet EP76V Van (2E-LJ) - 73 PS (54 kW; 72 hp) at 6,000 rpm, 10.3 kg⋅m (101 N⋅m; 75 lb⋅ft) at 4,000 rpm[3]
- Toyota Corsa
- Toyota Conquest (South Africa)
- Toyota Tazz (South Africa)
- Toyota Tercel (Caribbean/South America/Middle East)
Disclaimer:
Nothing is tested. Not even 3D printed at this time. Models might not work nor fit. Post a make if you do something with these so others will know.
