Toyota 2E 1.3 L exhaust manifold flange.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flange for Toyota 2E engine exhaust manifold. If you have to rebuild yours.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
If you ever have to build a manifold to replace your cracked cast iron one, here is the flange. Just upload it to the steel machining service of your choice and weld some pipes.
I made it because i was not able to find a model anywhere. There is also a scan of the exhaust manifold seal.
Also mock up for a rounded edge rectangular to 34mm inner and 36mm outer diameter pipe for directly welding rest of your manifold. Might be possible to have it metal 3D printed.
Fits: (propably)
- Toyota Corolla/Toyota Sprinter EE80, EE90, EE96V, EE97G, EE100, EE110
- Toyota Starlet EP71, EP81, EP82 (2E-E,Si Version), EP90
- Toyota Starlet EP76V Van (2E-LJ) - 73 PS (54 kW; 72 hp) at 6,000 rpm, 10.3 kg⋅m (101 N⋅m; 75 lb⋅ft) at 4,000 rpm[3]
- Toyota Corsa
- Toyota Conquest (South Africa)
- Toyota Tazz (South Africa)
- Toyota Tercel (Caribbean/South America/Middle East)
Disclaimer:
Nothing is tested. Not even 3D printed at this time. Models might not work nor fit. Post a make if you do something with these so others will know.
