Search results: manifold

Exhaust manifold

Just slice and print. No supports needed.

Elegoo Centauri Carbon Fan Manifold, Muffler/Silencer and Ducting Adapter

A set of ducting pieces for the Elegoo Centauri Carbon. Allows the silencing of fans and allows connection of ducting for external venting. Pieces are pushfit. Muffler drops case fan sound level by up to 10dB at source. Includes; manifold…

Dual 5015 to CPAP - Manifold

Had a hard time finding an adapter or manifold to use 5015 fans in conjunction with 19mm CPAP tubing for a remote part cooling setup. The few I found wouldn't work with how I have my gantry set up, so I went ahead and modeled this one. So…

Work Holding with Flushing Manifolds | Electrical Discharge Machining | Gridfinity

Purpose This print clamps aluminum sheet metal in-place. Clamping force is supplied by side-mounted magnets (6x2 mm). EDM Is a low-force process, meaning that little-to-no force is needed to hold the work piece in place. Side Flushing…

Satisfactory Power Slug (Very high poly & Manifold)

DISCLAIMER: The original models were made for the game Satisfactory (I highly recomand btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…

Satisfactory Lizard Doggo (Very high poly & Fully Manifold)

DISCLAIMER: The original model was made for the game Satisfactory (I highly recommend btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…

xTool S1 40W ABLUFT KRÜMMER - Seitlicher Ausgang / xTool S1 40W EXHAUST MANIFOLD - Side Exit

Bester Abluftkrümmer für deinen S1 - Seitlicher Ausgang - AD=100mm. Update: Auf Wunsch hinzugefügt, Datei für den original xTool Schlauch, welcher aufgeschoben wird: "Seitlicher Ausgang_originalSchlauch_AD74mm.obj" Konstruiert in FreeCAD…

Micro Irrigation Manifold

Multi port manifold for Micro plant irrigation system. It uses a standard Gardena/hozelock adapter on the garden hose. I have included a 4 port fused manifold. All port are active all the time the water is turned on. This model requires a…

Holley 4150 Intake Manifold Block Off Plate

Keep unwanted items from falling into your intake manifold when you've got your carb off. Very basic design, but it gets the job done. The “quick print” version has a thinner plate area and taller bolt tabs. It saves about an hour of…

3" Exhaust Manifold - P1S and X1C Compatible

Inhouse designed and used in our print farm, tailored for use with 3" ducting , this adapter seamlessly integrates with P1S and X1C models, providing an efficient solution for expelling toxic fumes. Compared to other designs, ours…

Subaru EJ20 (6/16) / Intake manifold spacer (right) Remix

This is a Intake Manifold Spacer remix for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). There is two Intake manifold spacer on the EJ20 engine ; they are not the same. The second is the mirror of the first. On the…

Dust extraction/hoover 3-way valved manifold/splitter

I wanted a way to connect a dust extractor to my Workbee CNC, band saw, and potentially a third tool (e.g. sander) without having to manually plug the dust extractor hose between tools. So I designed this three-way manifold with butterfly…

Ford FlatHead V8 (10/14) / Intake Manifold remix

This is an Intake Manifold remix for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). This design is planned to receive a supercharger soon. Release 24/03/2020 : New IntakeManifoldPulleyV2 (it replace…

jig frame pipe tube manifold

Printable radius and straight pipe to build easily exhaust manifold. you will find in these files all the tube templates for a diameter of 60.3 in STEP file. Each pin is 10° rotation I have also for 48.3 diameter MAKE ME A LIKE OR…

Exhaust Header/Manifold Fabrication System

I am working on designing a new exhaust manifold for my Volvo 940 turbo, and I remembered seeing a tube snap-on plastic fabrication system from a company. Searched for a 3D printed version and found don-f design over at thingiverse;…

Manifold - 1

Manifold - 1 used for our promotion of High Temperature Materials. You can use this model for sample / promotion prints for your clients/customers. Model Made By: Chrizz | Printables.com https://www.instagram.com/es_chrizz…

1 input 5 output watering manifold for drip irrigation; 1/4" input 5/32" outputs

1 input 5 output watering manifold for drip irrigation; 1/4" input 5/32" outputs prints best with barbs facing toward the build plate (& can likely print without supports)

jig frame pipe tube manifold Ø48.3

Printable radius and straight pipe to build easily exhaust manifold. you will find in these files all the tube templates for a diameter of 60.3 in STEP file. Each pin is 10° rotation MAKE ME A LIKE OR COMMENT, IS FREE FOR YOU ;) THANKS

BMW E36 Intake Manifold adapter for an E46 Airbox

I designed these adapters for a Friend who drives and builds an E36 M3 as a rally car. The final part was CNC milled in 7075 Aluminium but the PA-CF 3D Print worked fine for a first test

Chroma Kit Manifold

I wanted to close the big gab behind the Chroma Kit on my Phrozen Arco. This design leads the tubes inside the printer from behind the Choma kit, from being in a line to exit in a square. Two new revisions has been added. V2: Tbe manifold…

LS3 Top Mount Turbo Manifold

Remixed a couple LS3 exhaust manifolds together to get the top mount configuration.

Bowden Tube Multi Filament Manifold

Manifold for guiding up to 5 filaments through a countertop (benchtop) or cabinet. Clamps on bowden tubes on one side using two M3x(10-14mm) and uses push in tube connectors on other. When clamping on tubes wrap one layer of electrical…

Subaru EJ20 (9/16) / Cooling Manifold add-on

This is a Cooling Manifold for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). Print settings 1 x CoolingManifold : Layer:0.15mm Raft:no Brim:no Support:yes Infill:20% 1 x CoolingManifoldConnector : Layer:0.15mm…

Satisfactory Space Giraffe-Tick-Penguin-Whale Thing (AKA Da Bean) (Very high poly & Fully Manifold)

DISCLAIMER: The original model was made for the game Satisfactory (I highly recomand btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm really…

1968 Cadillac Vacuum Manifold V2

This is the second version of my take on classic Cadillac's vacuum manifold. The first version, while more dimensional accurate and closer to the original, is a lot harder to print and more fragile (see here ). What is it? The vacuum…

Predator 212 nibbi carb intake manifold

I designed 2 sizes. A longer one at 73mm and a short one at 63mm. Info online is 50/50 on which is better so I figured why argue and I'll let you guys decide on which one is better. Let me know how it works. I would personally print from…

Dust Collector / Vacuum Manifold / Selector

This is a set of workbench-mounted adapters that allows the easy selection of the hose which is connected to my shop vacuum. There are two adapters: one that connects to a 2 1/2" hose and another that connects to a 1 1/2" hose. The intake…

Dodge 4.7 Throttle body adapter for 08+ intake manifold (not yet printed)

This is my attempt at designing an adapter to install an early Dodge, Jeep, Chrysler, 4.7L V8 Throttle body onto the 08+ Intake manifold which is known to add ~20Horsepower over the pre-2008 Manifold. Since the earlier models used Drive…

Turbo Manifold - R53 Mini Cooper - for Borg Warner EFR B1-G turbocharger

turbo manifold concept for a Borg Warner EFR 6258 to be used on an R53 mini cooper. This design prioritizes short runner length and keeping the turbo deep in the engine bay. Sized to retain factory AC lines. Many other modifications will…

Plant Watering Manifold

I needed a way to keep some flats of plants watered while away on vacation. This manifold effectively waters a flat of 12 "six packs" when attached to a small fountain pump. I run the pump remotely for 2 minutes every few days. You will…

US General R134a Manifold Knob

This is a replacement knob for US General R134a AC charging manifold. The original knob cracked in half inside the case. This has been strengthened where the valve meets the knob for better longevity. Printing Details Supports on Print…

Small Manifold - 1

Small Manifold - 1 used for our promotion of High Temperature Materials. You can use this model for sample / promotion prints for your clients/customers. Model Made By: Chrizz | Printables.com https://www.instagram.com/es_chrizz…

1968 Cadillac Vacuum Manifold

This is the original version I designed. For a much improved version, please have a look here . This is a replacement for the 1968 Cadillac vacuum manifold (5 port version) which is part of the climate control vacuum circuit and is…

Intake manifold decoration

Hey, I present to you the intake manifold I made (it has no practical use - it can serve as a decoration ). Have a nice day :)

Modular pressure vial holder with manifold caps

We present a modular sample holder that integrates a parametric CAD design developed on OnShape.…

Goldwing GL1100 Manifold

Unbolt your carbs, bolt this in their place. As seen on my YouTube series, this allows you to put a throttle body in the center, and run fuel injection. Just sharing this in case anyone wants to try it out. Uploaded in individual pieces…

Flowhive Harvest Tube Manifold

This is used to keep bees from drowning in the honey during harvest. Cut a hole in the harvest bucket a little bigger than the hoses, but smaller than the manifold. Use 3mm screws and nuts to hold it together. Print instructions Print…

A/C manifold gauge knob

A/C Manifold Gauge Replacement Knob. I had a knob broken on my A/C Gauge but all I saw here where different kind of knobs, so I went ahead and created one in solid works for mine. Hope you guys like it and may find it useful.

Easy to print and assemble manifold for split-ventilator method (Neymen/Babcock)

Many have seen the study that demonstrates a single ventilator can be hacked to server multiple patents. This method is very controversial for many reasons but if hospitals decide to use this method, this manifold system is easy to print…

Carburettor intake manifold

Motorcycle carburettor intake manifold

Extreme test object non-manifold fix

Just a quick fix to make the object manifold

Networking Rack Exhaust Manifold

I needed to improve the cooling for my network cabinet that is in an unventilated cupboard. I designed and printed this in two parts to fit on the bed, along with the template provided to cut / drill holes in the cabinet. I have added a…

Weber 40 IDF intake manifold for Fiat 600-based cars

Intake manifold for mounting the Weber 40 IDF carb (and similar) to a Fiat 850 engine in a Fiat 600-based car (no tilt). This intake has a bottom end similar to the JO/EL intake (see pics), which means it will need quite a bit of intake…

Satisfactory Hog (+old version) & Alpha Hog (Very high poly & Manifold)

DISCLAIMER: The original models were made for the game Satisfactory (I highly recomand btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…

Hvac Manifold Knob

knob for Value Hvac gauge manifolds

Dodecahedron 12x Bottle Manifold

Reuse soda bottles with PCO 1881 threads to make this multi purpose installation. Use it for a biome for ants or algae or both. Use it to mix all your favorite sodas 12 bottles at a time. Fill some bottles with water and watch it defy…

throttle body adapter For 55mm Opel c20ne Throttle body to Rover & MG manifold.

Model was created by my and feel free to share.

2012-2015 RWD Tesla Model S air tank and manifold mount for air suspension

Brackets use existing frunk tub mounting holes. Supports 4 gallon air tank in proper orientation (drain down). Manifold bracket uses velcro straps to attach to the tank. Very sturdy setup.

Intake manifold / carburetor gasket for Honda Z50 Monkey

What is that? Intake manifold / carburetor gasket #09 for Honda Z50 Monkey. Fits the original Honda 16100-165-924 carburetor. I printed mine in PETG and the other option in TPU. Both materials are equally suitable. When using TPU, no…

8-inch to dual 3-inch vent manifold

Intended to split flow with low nonrecoverable pressure loss in a short distance from 8-inch vent hose to two 3-inch vent hoses. I used PETG for flexibility in installing it in the hoses which have tight fits.

AC Manifold Gauge knob

Made this replacement knob for my Orion AC manifold gauge set from Amazon after the originals cracked. Will probably fit similar looking models. Printed mine in ABS

Kegland Duotight manifold spacer

The Kegland MFL manifolds are great for distributing co2 for homebrew systems but a common frustration is that they are set at a 45 degree angle, this spacer just means that they will sit flush against a wall. Uses M5x20 bolt with nylon…

Heater Valve Manifold Saab 900 Classic '78-'93

A classic cars aficionado asked me to recreate the broken heater manifold of one of his Saab 900. The purpose of this part is to conduct hot water, with temperatures that will surely reach 80º C, so it must be printed using a material…

Powerhobby Increased Airflow Manifold

I got the Powerhobby twin fan heat sink for my Mojave and immediately noticed some things about it I didn't like. The fans don't have enough "breathing room" as in the heat sink fins are very shallow and don't allow for much air flow at…

ANYCUBIC Photon window exhaust manifold.

I recently acquired an used ANYCUBIC Photon resin printer. To be safely used in my workshop it needed an air exhaust outside, but I can't exactly drill a hole in the wall due to property reasons. So after generous amount of trial and…

Tomos A35 Intake manifold

Custom intake manifold for Tomos A35 moped / scooter. For use with stock (or similar) cylinders. I'm running an airsal cylinder, but I know it is the same as a stock one. It has an internal diameter of >= 14mm. Carb position is exactly…

Nissan Terrano KA24E intake manifold adapter for weber 32/34 style carburetor

Nissan Terrano KA24E intake manifold adapter for weber 32/34 style carburettor - don't ask me why, here is the model Carb used - fiat 125p / fso polonez / zuk licensed weber 32/34 Print it with 100% infill, preferably with petg or some…

Replacement Carburetor Intake / Heat Dam Manifold for Homelite/Ryobi – Part #51892001

I Printed it without enclosure with Prusa MK4S Material: Fiberlogy Nylon PA12 Layer height: 0.2mm Perimeters: 8 Infill:100% Supports: Yes Draft shield: Enabled Brim width: 10mm Satin sheet Heatbed temp 110c Nozzle temp 265c Printing…

Intake manifold for Fiat 850 engines in a Fiat 600-based car

The engines in the Fiat 850 family of cars were slightly canted. In order to keep the carburetor level, they canted the intake manifold in the opposite direction. The engines in the Fiat 600s were level. Swapping an engine from a Fiat 850…

FT Simple Scout Exhaust Manifold

This model is designed to be printed without any supports. Mirror the part to make the duplicate on the other side. In PrusaSclicer this can be done by right-clicking the part and selecting “Mirror”. You can then choose the axis in which…

VR5 20v intake manifold bushing 022 133 588 B

the bushings should fit the intake manifold of a vr5 20v engine circa 2003, this engine came in the bora, golf and jetta mk4, they were printed in ABS at 100% infill and scaled up to the shrinkage of my current spool (100.37 in…

Fiber Optic Manifold

This is a manifold to line up a 100 strand fiber optic whip (specifically this one ) with 4 SK6812 light modules (specifically these ). It was modeled using OpenSCAD and I've attached the original code so you can play with it. I had to…

B58 Billet Manifold honeycomb Top Plate (Revolution)

Top Plate that can be laser cut and welded, or printed and heavy duty glued on B58 Gen 1 and Gen 2 manifold utilizing a 4 inch wide core.

3/8x1/4 NPT Manifold

This is a spool holder that lets you keep the door on your FlashForge Adventurer 3 without making any modifications to the machine for printing external filament. All of the other designs are hours and hours, tons of wasted plastic and…

Yellow Jacket Manifold Mount

I designed this to help reduce the wear and tear on my yellow jacket manifold. I was sick of my gauges being slammed into everything around them and breaking/damaging the crystals on the gauges. This is a solid mount, using 5/16"…

Fireplace Manifold Mid Century Modern

Vanity wall exhaust manifold for freestanding Mid Century Modern Fireplaces. -No supports or brims needed

2" BSP to 3/4" bps pipe manifold adapter thing

I used two of these to connect 3 coils of ¾" ldpe pipe to the 2" pool pump outlet for swimming pool solar heating. Printed out of ABS, smoothed by acetone brushing. So far they've held up for 6 years.

Accessoires for PVL5211/PVL526 valve manifold

The PVL5211/PVL526 manifold can be used to actuate pneumatic robotics such as the Sunram 7. A single manifold base houses up to eight valves, but the Sunram 7 needs twelve. So two manifold bases are needed and these can be effectively…

Performance intake manifold for Fiat 850 engines in a Fiat 600-based car

12/19/25 update to release V2 based on feedback from an owner of the JO/EL intake: -Changed the cutouts under the venturis from spherical to conical. -Changed engine side venturi cutout diameter from 36mm to 37mm. -Changed non-engine side…

Small Pump Spray Manifold

Precision misting for cloning systems, propagation chambers, terrariums, and custom hydro projects. Designed originally for the PropBox system, this compact spray manifold delivers even water distribution through multiple misting heads…

Volvo R5 engines manifold dummy plugs for sanding

Read carefully before printing: .3mf file includes flat (0.6mm /3layers) gaskets which needs to be printed with TPU .stl files includes hard gaskets which needs to be bolted to the manifold (with a TPU gasket mentioned above between them)…

Nissan L16 Exhaust Manifold Flange

Just a DXF of the flange for a Nissan/Datsun exhaust manifold so you don't have to trace and cut. I will be sending this to a shop with a water jet to cut out of ½" or 12mm stainless. My Subaru exhaust pieces from Grimmspeed are ½", so…

Briggs and Stratton 407777 Air Filter Cover / Intake Manifold

Replacement air filter cover / intake manifold Made to replace Air Cleaner Cover 795120 792289 for Briggs & Stratton Engine 407777 40G777 44H777 44N777 PETG 3-4 Walls 10% infill Supports required

Toyota 2E 1.3 L exhaust manifold flange.

If you ever have to build a manifold to replace your cracked cast iron one, here is the flange. Just upload it to the steel machining service of your choice and weld some pipes. I made it because i was not able to find a model anywhere.…

OM642 intake manifold fixture

WIP While this is a work in progress I will at least release where I am at right now I dont have one sitting around nor do I work on many to test the fitment on so this is a release so people can test how it fits and report back this is…

Intake manifold for Inverter generator

After the original injection mold part broke, I designed a new part for my Load UP 1000 inverter. As the part will stay cool from the passing air it can be printed in PLA, but I recommend something more durable like PETG/ASA.

Straight air manifold wall mount

Just two brackets to mount a cheap straight 5" (128mm) air pressure manifold to a wall. Cross section of the beam should fit a square of about ¾" (19mm). Printer Brand: Prusa Printer: MK4 Rafts: No Supports: If printed with holes on the…

Formbot Marathon exhaust manifold

this is a manifold to exhaust fumes through a 2” flexible duct. It is designed to be used with the Formbot Marathon IDEX printer. this model utilizes a 2” duct adapter found here:…

VEVOR 8in Fan Manifold 4-6-4

Friction fits to 8in VEVOR inline fan intake. Allows the direct connection of (x2) 4in flex hose on the sides. The central port is sized to accept the 6in AC hose intermediate coupler (it is not designed to accept 6in hose directly, it is…

Volvo V70 magneti marelli dummy plug manifold, hard

Ideal for cleaning, sanding etc Fits for my V70 T5 B5234T3 engine but should fits for most Volvo engines

High performance intake manifold for Fiat 850 engines in a Fiat 600-based car

12/19/25 update to release V2 based on feedback from an owner of the JO/EL intake: -Changed the cutouts under the venturis from spherical to conical. -Changed engine side venturi cutout diameter from 36mm to 37mm. -Changed non-engine side…

Maserati Merak SS 1975 inlet manifold grill

Only one thousand of these were ever made, so sourcing of parts is fairly difficult. I printed it from Fiberlogy PCTG. Pictures show also the cracked original grills.

High-Flow Quad Splitter Manifold (3" to 1.5" NPS PVC)

Short Description / Summary A heavy-duty, fluid-optimized 1-to-4 splitter manifold designed for submerged, high-pressure water applications. Engineered to handle high-flow submersible trash pumps (up to 1 HP / 5000 GPH) with minimal…

Fits Honda ST70 / CT70 Trail 70 Intake Manifold – K&N RC-0790 Pod Filter Adapter

Honda ST70 / CT70 Trail 70 Intake Manifold – K&N RC-0790 Pod Filter Adapter (34 mm Carb Inlet) A smooth-flowing intake manifold that lets you fit a K&N Universal Air Filter (part number RC-0790) to the standard Honda carburettor on the…

Tower of Stairs - Manifold Garden

This model has two versions: one with the walls and bridges separately printed (generally recommended) and one with all the parts combined. Most parts need a few supports but the removal should be trivial. For assembly, I would recommend…

YARQM: Manifold Thing

I took a crack at this impossible loft, it's an ugly sequence but looks kinda OK. Do not look at the zebra analysis, it's horrific. Original Question:…

Hanging Basket Watering Manifold

SImple 2 piece model designed to ensure batter water distribution in a semi-circular hanging basket

HT07-4a Coolant Manifold Piping for Suzuki Alto Works C Chassis

Coolant manifold piping designed specifically around a generic HT07-4A turbo. The HT07 turbo comes in a number of varieties so please confirm fitmet with a test print in PLA or similar. This is intended to be used as a functional…

ENCO Lathe 110-1351 Feed Gearbox Oil Distribution Manifold

I was not happy with the factory oiling solution for the power feed / threading gearbox on my Enco lathe so I designed this. All oil ports are now in one location and sealed from chips or debris. I doubt anyone will ever need these…

UndermountAC exhaust manifold

UndermountAC is a DC powered minisplit air-conditioner used in RVs. The supplied manifold has a problem where it will spray water out the exhaust ports when the fan is set to anything higher than 'Low'. This manifold improves on the…

Watercooling manifold DIN Rail

Watercooling manifold to mount on DIN rail you need this two things https://de.aliexpress.com/item/1005004807850181.html?spm=a2g0o.order_list.order_list_main.285.68035c5fdkXKsP&gatewayAdapt=glo2deu…

Gilera SP01 intake manifold LHS

Altough a specific model for a certain scenario I decided to share it. The original manifold for this engine is point towards the right hand side. I needed one that is LHS, because more room for air filter and further from the exhaust…

Fiat / Ford / Lancia (1.1 & 1.2) – Ansaugrohr Reparaturstutzen / Intake Manifold Repair Sleeve

Beschreibung (Deutsch) Überblick Bei den Benzinmotoren des Fiat Panda (Typ 169, z. B. 1.1 / 1.2 FIRE) bricht gerne der kleine Schlauchanschlussstutzen (Unterdruckanschluss / Kurbelgehäuseentlüftung) am Ansaugtrakt bzw. Luftfiltergehäuse…

Velta Underfloor Heating Manifold Adapter – M30x1.5 Female Port to Standard Thermal Actuator (Parametric)

Old Velta (now Uponor) underfloor heating manifolds have their thermostatic valves sitting deep inside a female M30x1.5 thread. Standard thermal actuators (230 V / 24 V, NC or NO) come with an M30x1.5 union nut and expect a male thread…

Exhaust Header/Manifold Fabrication System

I am working on designing a new exhaust manifold for my Volvo 940 turbo, and I remembered seeing a tube snap-on plastic fabrication system from a company. Searched for a 3D printed version and found don-f design over at thingiverse;…

High performance intake manifold for Fiat 850 engines in a Fiat 600-based car

12/19/25 update to release V2 based on feedback from an owner of the JO/EL intake: -Changed the cutouts under the venturis from spherical to conical. -Changed engine side venturi cutout diameter from 36mm to 37mm. -Changed non-engine side…

3-Way Manifold Sample – Support Free & TPU Ready

Showcase the incredible versatility of 3D printing and modern filaments with this organic 3-way manifold sample. Designed to look like a complex technical automotive part (like an exhaust collector or intake), this model serves as a…

Dog Food Scoop (Smooth Manifold)

The original file had supports popping up in the middle of the STL so I dropped it into Meshmixer and made it solid.

Prusa Core One Cabinet Fume Manifold to a 120mm Flex Pipe Exhaust

Model is probably an overkill, but I like the aesthetic of piping and was an interesting cad design exercise whilst waiting for the delivery of my Core One and then getting the Mk3.5 to build it for its successor. The main design purpose…

Pickle Rick Tap Handle (Non-manifold issues fixed)