1 / 10
High-Flow Quad Splitter Manifold (3" to 1.5" NPS PVC) — image 1
1 / 10

High-Flow Quad Splitter Manifold (3" to 1.5" NPS PVC)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A heavy-duty, fluid-optimized 1-to-4 splitter manifold designed for submerged, high-pressure water applications.

Rating
0 / 5
Likes
3
Downloads
9
Makes
0
Views
72
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Short Description / Summary

A heavy-duty, fluid-optimized 1-to-4 splitter manifold designed for submerged, high-pressure water applications. Engineered to handle high-flow submersible trash pumps (up to 1 HP / 5000 GPH) with minimal turbulence. Perfect for custom pond aeration systems, aquaponics, or pool/spa bypass loops.

Full Description

Welcome to another functional, engineering-grade design from Torque Joint Labs.

This manifold was mathematically modeled in Autodesk Fusion 360 to smoothly transition a massive volume of water from a single 3-inch pipe into four 1.5-inch branches. It eliminates the sharp, asymmetrical internal corners found in standard PVC fittings to minimize fluid turbulence, reduce pump backpressure, and perfectly balance flow distribution across all four nozzles.

 

Physical Tolerances & Assembly

  • Inlet: Modeled to act as a perfect, tight slip-fit into a standard 3" NPS PVC coupling.

  • Outlets: Modeled to slip-fit directly into standard 1.5" NPS PVC fittings.

  • Assembly & Waterproofing: Because this manifold is designed for high-pressure, submerged applications, the slip-fit joints must be permanently bonded and sealed. Do not use standard superglue or household caulk. A fast-curing, UV-resistant marine polyurethane is required to create a permanent, waterproof, structural bond between the printed plastic and your PVC fittings.

Recommended Hardware & Materials (Affiliate Links)

(Note: As an Amazon Associate, I earn a small commission from qualifying purchases at no extra cost to you. This helps support more functional designs!)

Watertight Slicing Instructions

This part is subjected to high internal hydraulic pressure. Standard aesthetic print profiles will leak. To guarantee a structurally sound, solid part, please follow these exact slicing parameters:

  • Material Selection:

    • ASA / PC (Polycarbonate / PC-CF): Recommended for maximum strength and UV resistance outdoors or in shallow water.

    • PETG: Excellent baseline for deep or shaded submersion.

    • PLA / PLA+: Do not use for water environments or outdoors. Moisture absorption and UV light will cause PLA to degrade and fail over time.

    • ABS: Avoid due to rapid UV degradation outdoors.

       

  • Nozzle: 0.8 mm (Highly recommended for layer thermal mass and strength).

  • Layer Height: 0.4 mm.

  • Wall Loops: 5 to 6 perimeters. The walls are modeled at exactly 3.5 mm thick. Forcing 5+ perimeters ensures the slicer builds the shell out of 100% solid, continuous lines with zero infill voids.

  • Extrusion Multiplier (Flow Ratio): Increase by 2% to 3% (e.g., 1.02) to deliberately over-extrude and forcefully fuse the perimeters, sealing any microscopic pinholes.

  • Speed / Max Volumetric Flow: Cap your flow rate at 12 to 15 mm³/s to prevent the extruder from clicking and under-extruding. Bump your nozzle temp 5°C to 10°C higher than normal to handle the thick plastic flow.

  • Seam Settings (CRITICAL): Enable "Staggered Inner Seams" to prevent a continuous weak point through the wall. Set Seam Gap to 0%. If your slicer supports it, use a Scarf Joint (Contour) for the outermost seam.

  • Bed Adhesion: Print directly on the bed with an 8 to 10 mm brim. Do not use a raft. At over 250 mm tall, a raft will likely cause your print head to crash into the Z-axis limits of standard mid-sized printers.

     

Files Included

  • High-Flow Quad Splitter Manifold (3 NPS to 1.5 NPS PVC).stl – Standard mesh file exported from Fusion 360.

  • High-Flow Quad Splitter Manifold (3 NPS to 1.5 NPS PVC).3mf – Standard 3MF model file exported from Fusion 360.

  • High-Flow Quad Splitter Manifold (Elegoo Centauri Carbon 1 Slicer).3mf – A pre-configured project file specifically sliced and optimized for the Elegoo Centauri Carbon 1, complete with all the watertight settings mentioned above.

Tags