Work Holding with Flushing Manifolds | Electrical Discharge Machining | Gridfinity
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A gridfinity compatible, moldular, work holding solution for desktop EDM machining. Includes optional side flushing
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 547
- Makes
- 0
- Views
- 1,676
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Purpose
This print clamps aluminum sheet metal in-place. Clamping force is supplied by side-mounted magnets (6x2 mm). EDM Is a low-force process, meaning that little-to-no force is needed to hold the work piece in place.
Side Flushing
‘Flushing’ is pumping clean water around a cutting area. Flushing improves the reliability of EDM machining. This design includes a barb adapter for 6-7 mm ID silicone tubbing. Clean water is pumped through the print, to side clamps that distribute the water around the work.
Print Settings
ASA or PLA
0.12 - 0.2 mm Layer Height
No Supports Required
Assembly
Glue magnets (6x2 mm) in-place with cyanoacrylate super glue. Ensure that magnets are in the correct orientation to mate with a gridfinity vat.
https://www.printables.com/model/411226-edm-vat-electrical-discharge-machining-gridfinity