Work Holding with Flushing Manifolds | Electrical Discharge Machining | Gridfinity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gridfinity compatible, moldular, work holding solution for desktop EDM machining. Includes optional side flushing
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 547
- Wydruki
- 0
- Wyświetlenia
- 1676
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Purpose
This print clamps aluminum sheet metal in-place. Clamping force is supplied by side-mounted magnets (6x2 mm). EDM Is a low-force process, meaning that little-to-no force is needed to hold the work piece in place.
Side Flushing
‘Flushing’ is pumping clean water around a cutting area. Flushing improves the reliability of EDM machining. This design includes a barb adapter for 6-7 mm ID silicone tubbing. Clean water is pumped through the print, to side clamps that distribute the water around the work.
Print Settings
ASA or PLA
0.12 - 0.2 mm Layer Height
No Supports Required
Assembly
Glue magnets (6x2 mm) in-place with cyanoacrylate super glue. Ensure that magnets are in the correct orientation to mate with a gridfinity vat.
https://www.printables.com/model/411226-edm-vat-electrical-discharge-machining-gridfinity