Liczymy pasujące modele…
Hi, this is a powerbank-holder for the HTC Deluxe Audio Strap (DAS) & Anker 533 PowerCore PD30W Powerbank. Designed to sit on the top portion of the DAS in order to be able to lean back in a chair without a powerbank sticking out. Perfect…
Description The Rack Robotics's Powercore is a transistor-capacitor hybrid EDM power supply unit. The Powercore creates, maintains, and monitors electrical sparks in an EDM machine. It is designed to be affordable and hackable. Electrical…
TPU case to protect the Anker 737 power bank. Print standing upright, supports are included where needed. Printed with 2 walls and 30% infill using a 0.4mm nozzle and NinjaTek NinjaFlex TPU with 85A hardness. As @KimBauters mentions, less…
Anker 737 PowerCore 24K bracket for HEQ-5 tripod Fits tripod legs with a diameter of 44mm Powerbank: https://amzn.eu/d/8yI4wjq 24000mAh Happy printing!
Angled Cable Recommended. Just slide the Power Bank in before you clip it on the Deck and you're ready to go! Print Settings: 0.4mm Nozzle 4 Perimeters 0.3mm Layer Height Material: PETG
A 4x1 gridfinity organizer for the Anker Powerbank PowerCore 20000. 15% infill 0,2mm
Anker 737 PowerCore 24K bracket for 25mm or 28mm tripod Fits tripod legs with a diameter of 25mm or 28mm Powerbank: https://amzn.eu/d/8yI4wjq 24000mAh Happy printing!
this is a belt clip battery holster for the Anker PowerCore slim 10,000mAh battery good for extended Vr play or charging up https://www.amazon.com/dp/B07QXV6N1B/ref=cm_sw_r_cp_api_glt_i_E8Z6DH22DHG2KWP957X8?_encoding=UTF8&psc=1 Print…
This is a battery mount for a Quest 2 HMD with the Kiwi headstrap. It attaches a Anker PowerCore 13000 to the rear of the headstrap to balance the headset out, and increase the battery life substantially. This mount is attached via two…
A 2x1 Gridfinity holder for an Anker PowerCore 13000 powerbank Created with the help of the awesome Fusion 360 Gridfinity Generator add-on
Just a Anker powerbank holder. The inner dimentions are 7,5x2,2cm and 7cm deep. There are two mounting holes on the back. Or stick it on the wall with double sidet tape. I printed this one for the Anker Powercore Essential 20000 but maybe…
Belt holster for said USB battery. I designed this so that I could use this to power my Vive Pro wireless VR HMD longer than the stock battery. Print instructions Holster is a separate scad file and dimensions can be freely adjusted if…
This is a battery adapter to attach an Anker PowerCore 10000 battery to the lower strap of the HTC Vive Deluxe Audio Strap. I have it attached to an Oculus Quest 2 via adapters. This adapter includes small slots for narrow zip-ties in…
The Anker PowerCore Essential 20K battery bank isn't really powerful enough to charger the deck while you play, but it's the battery bank I have, so I wanted to make a clip to hold it. You can buy the same model here:…
Clamp to hold an Anker PowerCore Speed 20000 PD on a Manfrotto 055 tripod leg. It should also fit any other tripod with a leg diameter of 30 mm. This might also fit other Anker PowerCore products with similar measurements. For reference,…
This is a holder to attach an Anker PowerCore+ 26800 PD to an IKEA Skadis plate. Nothing very special about it. Printed it myself in PETG. 0.2mm layer height 0.4mm nozzle Filament used: https://amzn.to/3J4QhE3 - awesome material. Prints…
Because using my phone while riding the bike (e.g.: navigation) needs a huge amount of battery, I decided to buy an external battery pack and to design a holder for my mountain bike. It suits for the Anker PowerCore 10.000 mAh but I also…
Anker Powercore 24K Gridfinity Bin 4x2. loose but good fit
This model can be printed to hopefully allow for attaching an Anker PowerCore+ 26800 to the Killswitch Case while maintaining compatibility for the kickstand or other accessories. I have not printed this yet. Huge thanks to…
This replaces the BOBOVR Battery Dock and allows you to use an external power bank in its place while retaining the “hot swap” capabilities. I went with the Anker PowerCore 10K Pro. The magnet holes in this remix are reduced to exactly…
Holds powercore 10000PD (A1235), may work for other 10000mAh models. The opening is 115mm x 26mm with a rounded bottom.
This items will hold the Anker PowerCore Essential 20000 (Model A1268). I have other models for different USB power banks in the works as well. You will need two M2.5 Skadis T-Nuts by @6d6178 and two M2.5 DIN912 screws for mounting the…
A simple slide on cable tidy for the Anker PowerCore 1300
I modeled this for developing a battery bracket for my chromebook. But I figured I'd toss it up here for other people to use. Category: Models
Little Phone Dock for the most used Anker® PowerCore Power Banks. This will make your movie experience easier during a train / plane ... travel Print Settings Printer: CR10 Mini Rafts: Doesn't Matter Supports: Doesn't Matter Resolution:…
This holds an Anker PowerCore10000 power bank onto the collection of Elite Strap clones here for the Oculus Quest 2. I found other solutions for holding the power bank too hard to use. I didn't have any good rubber bands, and wasn't about…
An adjusted holder for the PowerCore 10000, for use with https://www.printables.com/model/788221-pico-4-powerbank-holder Could do with having the battery window moved up to the top, and power button bit removed. So the power button side…
This is a bumper for the Anker PowerCore 5000 powerbank with an action camera mount (e.g. GoPro). The powerbank can be used to supply the action camera with enough power since the most batteries do not last very long. I printed this with…
Bracket for mounting an Anker PowerCore+ 26800 to a Cayer BV30L tripod. Lets me run my Fuji X-T3 basically all day for recording video. Mount works equally well inside or outside the leg. Fully parametric design, I included the Fusion 360…
A remix to fit the Powercore 533 10,000mah pack onto the DAS.
I created this in Onshape so that I could use the Ender-3 S1 Plus as the CNC part of the EDM project created by RackRobotics. As I have the original PowerCore, I have not started using the Wire EDM mod yet. As it is, I need a way to hold…
IKEA Skadis holder for Anker PowerCore 13000. Only the upper two hooks needs support.
This is a battery holder I made for power on the go for my phone when biking. I used an Anker PowerCore 5000 found here . It could be adapted for other sized batteries if desired.
Benötigt kein Support. Gedruckt habe ich mit einer 0.8 Düse und einer Layer height von 0.4mm um Zeit zu sparen. Die Aussparung hinten ist für einen Klett-Kabelbinder gedacht, um diese an einem Stativ zu befestigen.
PowerCore 10400 Holder for Quest 2 Elite Strap!
This is a holder for the Anker PowerCore 5000 battery. It mounts on the left side of Roger Linn's Linnstrument MIDI keyboard, and connects via a USB Type A cable to provide power. It can be connected to the Linnstrument's USB Type B port,…
This is a holder for the Anker PowerCore+ mini that attaches securely to the side of LinnStrument using the strap holders. It allows LinnStrument to be battery powered, and with a device like CME WIDI, makes it possible for LinnStrument…
A battery holder for the Anker PowerCore Essential 20000 battery pack that attaches to the leg of an EQ5 tripod. I designed an appropriate holder (in OnShape) for the size of the Anker PowerCore Essential 20000 pack and mashed it onto a…
This is a clip-on mount which holds and Anker PowerCore 2680 Power Bank to a Manfrotto Video Tripod. It is currently designed as two parts. I also included STL's which can hold two 2680's This allows me to charge/power all the devices on…
A holder for the Anker powercore 10000 Powerbank. It attaches with zipties to the babybay bed. Diameter 20mm.
Had this PowerBank lying around and needed some battery life for my Quest 2 Standard Strap.
I designed this to securely hold my Anker PowerCore+ 26800 PD in my Aer Travel Pack 2 (small). It has an additional slot to put cables and adapters. Links Fits this Battery: https://smile.amazon.com/dp/B07XRJZXKY Fits this Backpack:…
Gridfinity Bin for 1x Anker PowerCore+ Mini (A1104) with 6x3mm magnet holes Powerbank diameter: 23mm
Hi. This is a model of Transformers Powercore Combiners Mudslinger's upper thigh. This is a weak point in the toy. If you want to use the original or replacement 2mm screw, you will need to tap threads into the screw hole. I've provided…
Original model is great, just needed to secure it to a flat surface without drilling.
Another battery holder for the DAS Vive headstrap. It will need support for one of the clips.
This is the POWERCORE: a 3d printed modular battery system. it is based on an 18650 cell.
Anker PowerCore 13000 with a hole at the bottom. Safes material and allows cable passthrough
Gridfinity holder for Anker PowerCore Essential 20000 (A1268)
This items will hold the Anker PowerCore 10000 (Model A1246). I have other models for different USB power banks in the works as well. Right now I also have this holder for the PowerCore Essentials 20k You will need two M2.5 Skadis T-Nuts…
I designed this to allow me to wall mount the Anker PowerCore+ units I have whilst they charge so they are on hand and easy to grab when heading out the house. Couldn't find one for this larger Anker battery pack so designed one myself.…
Slid it right down the topside of DAS. Battery slides right in. Printed with PLA, 0.4mm nozzle. Print upright with bedsupports. Made for Anker Powercore Sense III 20.000mah powerbank, and Vive Deluxe Audio Strap
THIS IS A WORK IN PROGRESS - PRINT AT YOUR OWN RISK This is a base which should fit an Anker PowerCore II 10000 USB power bank, for use with the TS-80 iron. All other parts for this can be found on the original model here:…
Print this out of TPU or any other rubbery elastic material at a vertical orientation. Comes with cut outs for the light indicator and on/off button
