Bowden Tube Multi Filament Manifold
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.16 – €2.64 net (excluding VAT)
For file: Countertop Filament Guide_0.15mm_PETG_MK3SMMU2S_2h54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.40 excluding VAT (range midpoint).
- Weight reported by the author
- 21 g
- Print time reported by the author
- 2.9 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Manifold for guiding up to 5 filaments through a countertop (benchtop) or cabinet.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 115
- Makes
- 0
- Views
- 1,352
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Manifold for guiding up to 5 filaments through a countertop (benchtop) or cabinet. Clamps on bowden tubes on one side using two M3x(10-14mm) and uses push in tube connectors on other.
When clamping on tubes wrap one layer of electrical tape around end of tubes and leave a few mm from internal tapered channel to allow for snug clamping and perfect alignment of tube pushed in from bowden connector. The taper will guide the pushed in tube into the narrow channel.
Edges rounded .25" so it can be flush mounted using ¼" router bit.