Tomos A35 Intake manifold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Intake manifold for Tomos A35 standard moped
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Custom intake manifold for Tomos A35 moped / scooter. For use with stock (or similar) cylinders. I'm running an airsal cylinder, but I know it is the same as a stock one. It has an internal diameter of >= 14mm.
Carb position is exactly the same as the stock manifold. My manifold has a larger engine-side opening to allow the mixture to flow more freely through the membrane. Also has a nice cuve instead of the weird angles on the stock one.
Two versions: one with and one without oil plug. Standard M6 thread for a standard Dellorto Banjo bolt(? - the hollow bolt the oil flows through)
I printed mine using Sunlu ABS-like resin on an Elegoo Mars 4 Max. Has not been tested for long periods of time. I am not quite sure how you would print this on a standard FDM printer, because of the required supports. I also haven't tried it.