Tomos A35 Intake manifold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Intake manifold for Tomos A35 standard moped
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Custom intake manifold for Tomos A35 moped / scooter. For use with stock (or similar) cylinders. I'm running an airsal cylinder, but I know it is the same as a stock one. It has an internal diameter of >= 14mm.
Carb position is exactly the same as the stock manifold. My manifold has a larger engine-side opening to allow the mixture to flow more freely through the membrane. Also has a nice cuve instead of the weird angles on the stock one.
Two versions: one with and one without oil plug. Standard M6 thread for a standard Dellorto Banjo bolt(? - the hollow bolt the oil flows through)
I printed mine using Sunlu ABS-like resin on an Elegoo Mars 4 Max. Has not been tested for long periods of time. I am not quite sure how you would print this on a standard FDM printer, because of the required supports. I also haven't tried it.