Star Wars Imperial 120mm Fan Grill

I created this to accompany my very imperial storm trooper inspired custom built PC. I wanted a fan grill for the rear 120mm fan so designed my own based on the imperial logo and the imperial paneling pattern that is often seen throughout Star Wars, particularly the empire reign and on empire flagships. I think it's turned out very well and really makes the back wall of my PC pop now. 

Couple of things to note if you're making. 

1. on my initial print, i experienced some slight warping on the edges, despite having my bed temp sat at 55 degrees and nozzle temp at 200 degrees, i normally don't experience any warping, but the flange is quite thin, so i would recommend possibly adding a BRIM. 
2. It was a shaky start getting the first layer down due to the hole cut outs being quite close together, you may wish to reduce your first layers speed, then consider upping the print speed once the first layer is down.
3. It appears i have inadvertently made a wind chime, as since applying the cover there is now a quiet hum. After assembling the glass back onto my PC, the hum did quiet down so i can certainly live with it (especially since i have my head set on 100% of the time i am sat at my PC), but i am just warning you at the forefront to expect this!
4. If you choose to make this file for your own themed (or even non themed) PC, please post makes and images, would love to see other peoples set ups thank!

My Make:

Printed using Eono PLA + in white and Sunlu PLA+ in black. 

Print temp 200 degrees,

Bed temp 55 degress, 

Printed in dynamic quality (0.16mm layer height)

To achieve the black ring, at a layer height of 0.16mm, you need to add a filament change in (if you don't have a fancy multi colour machine like me) at layer 11, if your using a different layer height preset, adjust accordingly. 

Happy printing!