TOOLTOP ET693C Thermal Camera Protection Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A protection cover for the TOOLTOP ET693C thermal camera
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 105
- Wydruki
- 2
- Wyświetlenia
- 337
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Protection cover for my TOOLTOP ET693C Super IR Thermal Camera.
It's highly recommended to use a filament which is a little flexible and has very good layer adhesion. PCTG (not PETG) works very well, but PETG may is fine too, as PCTG is not that common. PLA, if it's not a special blend, may is to brittle (never tried).
I also make a nice box to store the camera in (using the original foam insert).
Support my work
For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).
If you want to support my work directly, you can buy me a coffee.
If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |
Also check out my other models.