1 / 1
Nikon SB-26 Hot Shoe mount flash repairing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spare hot shoe mount for the Nikon SB-26 camera flash repairing.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
A spare hot shoe mount for the Nikon SB-28 camera flash repairing.
3D printing settings for nylon:
0.25 (0,2) mm nozzle
0.08 (0,1) mm layer height
- walls ≥6
- 6 layer top/bottom
- filling ≥ 40%
- support - yes
- brim 5mm
- speed ~30-40 mm/s
- fan -off (20% for bridge)
I printed PETG, but I wasn't sure of its reliability. That's why I used pre-dried PA-66 nylon and can recommend this material.
I haven't tried printing with a 0.4mm nozzle, but it might be worth trying and then finishing with sandpaper.