1 / 1
Nikon SB-26 Hot Shoe mount flash repairing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A spare hot shoe mount for the Nikon SB-26 camera flash repairing.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 127
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
A spare hot shoe mount for the Nikon SB-28 camera flash repairing.
3D printing settings for nylon:
0.25 (0,2) mm nozzle
0.08 (0,1) mm layer height
- walls ≥6
- 6 layer top/bottom
- filling ≥ 40%
- support - yes
- brim 5mm
- speed ~30-40 mm/s
- fan -off (20% for bridge)
I printed PETG, but I wasn't sure of its reliability. That's why I used pre-dried PA-66 nylon and can recommend this material.
I haven't tried printing with a 0.4mm nozzle, but it might be worth trying and then finishing with sandpaper.