Drop down bracketry for sliding hardware rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extension bracketry to drop down heavy duty rails for larger drawers or hideaway tables for workbenches
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I created this to increase my workspace below my workbench for a soldering station originally. I used heavy duty hardware sliding rails that you might use for a keyboard or something similar but this adds enough room to allow a desktop soldering station and electronic power supply, etc…. Select the length you need and use the screws to clamp the printed rail bracket extensions together.
You will need;
- 3mm cap or button screws x 20mm and nuts x 2 for each holder = 8
- 3mm cap or button screws x 16mm and nuts 2 for each rail bracket extension = 8
- Use hardware provided by kit to attached rail bracket extensions to hardware rails
- 16 counter sunk wood screws(there are some provided in kit, but you may need to use other, more appropriate lengths depending on weight you're holding up)
- 1 kit from amazon linked below
Location of the rails I used:
https://www.amazon.com/gp/product/B07GJ838R8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1