Drop down bracketry for sliding hardware rails
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extension bracketry to drop down heavy duty rails for larger drawers or hideaway tables for workbenches
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I created this to increase my workspace below my workbench for a soldering station originally. I used heavy duty hardware sliding rails that you might use for a keyboard or something similar but this adds enough room to allow a desktop soldering station and electronic power supply, etc…. Select the length you need and use the screws to clamp the printed rail bracket extensions together.
You will need;
- 3mm cap or button screws x 20mm and nuts x 2 for each holder = 8
- 3mm cap or button screws x 16mm and nuts 2 for each rail bracket extension = 8
- Use hardware provided by kit to attached rail bracket extensions to hardware rails
- 16 counter sunk wood screws(there are some provided in kit, but you may need to use other, more appropriate lengths depending on weight you're holding up)
- 1 kit from amazon linked below
Location of the rails I used:
https://www.amazon.com/gp/product/B07GJ838R8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1