Ausom Electric Scooter Nut Covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
20mm / 21mm covers that will stay on!
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 121
- Wydruki
- 1
- Wyświetlenia
- 757
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Lost the stock ones during the first couple rides, so made these for a super snug fit AROUND the nuts. The rounded end also keeps your shins and ankles protected while minimizing deflection.
If you need some seriously hardcore protection get some Rail Sliders (Motorcycle style) for your fork.
These WILL protect and easier on your shins/ankles, but obviously not like metal ones will.
Bonus is that these covers keep your profile slim for tight spots ex. lane filtering.
Front and Rear ones. (21mm) Front ones have a deeper space for the axle bolt.
Swing Arms (20mm)
UPDATE 10/14/25 - Increased protection
They are a SNUG FIT and capture around the nut. May need to push hard or use a rubber mallet but be careful.
For other scooters these may fit. IF they do please post the make and model of the scooter/cycle to help others!
Printed in TPU - No support needed (print open side up) - 3 walls - 30% Cubic infill/7 Bottom layers.