db Drag sensor placement jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the placement jig used in DB Drag and BassRace Competition.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Originally published by piti_rocks on Thingiverse: https://www.thingiverse.com/thing:2587235
Just wanted to share this on printables too.
Summary:
This is the placement jig used in DB Drag and BassRace Competition. I designed it according to the rulebook. I designed a splitted version for smaller printers too. There are 2 Versions. The new one without the pin and 1/8" thickness and a the old style with the pin and 1/4" thickness.
Quote from the dbDrag 2025 Rulebook:
Question - Where should the sensor be placed in the vehicle?
Answer - The sensor should be affixed to the windshield on the passenger side of the vehicle. The sensor location should be 12 inches from the passenger side windshield pillar and 4 inches above the dash.