db Drag sensor placement jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the placement jig used in DB Drag and BassRace Competition.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Originally published by piti_rocks on Thingiverse: https://www.thingiverse.com/thing:2587235
Just wanted to share this on printables too.
Summary:
This is the placement jig used in DB Drag and BassRace Competition. I designed it according to the rulebook. I designed a splitted version for smaller printers too. There are 2 Versions. The new one without the pin and 1/8" thickness and a the old style with the pin and 1/4" thickness.
Quote from the dbDrag 2025 Rulebook:
Question - Where should the sensor be placed in the vehicle?
Answer - The sensor should be affixed to the windshield on the passenger side of the vehicle. The sensor location should be 12 inches from the passenger side windshield pillar and 4 inches above the dash.