Liczymy pasujące modele…
Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…
Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…
Please don't forget to hit the like button if you find this model useful. This is a 3D printable replacement slider for both standard and reverse bale zippers. A key feature is that it can be installed without needing to unsew the zipper…
With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need to grip the…
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…
Might be slightly over-engineered, but I always keep a few different sizes on my key-chain. That way I'm always ready, when a zipper pull on or around me breaks. Saved me and my friends a bunch of times already. Print recommendations:…
A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…
With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need to grip the…
I originally designed a replacement 3D printed knob for a Smeg oven after struggling to find a replacement. I've since added a total of 7 customisable Knob designs and 5 customisable Inserts that can be mixed and matched to create the…
Overview My Subaru was missing a few body panel retaining clips and I had the bright idea: why not print my own. After doing some searching for existing models, I found a few but wasn't entirely happy with the couple options I test…
Here is a reinforced replacement for broken kitchen hinge. You don't need to use any supports to print it. I printed it with these parameters: - 0,2 mm layers height - 6 walls - 30 % infill Please give it a 💖 if you like it 🥰
If you used this part consider leaving me a small tip using the below links! https://www.buymeacoffee.com/wafflecart https://ko-fi.com/wafflecart Silhouette cameo 5 roller replacement parts. This can be used to replace the parts on the…
Źródło oznaczyło ten model jako treść 18+.
I found myself replacing a couple of fan blades in tools and a hair dryer and got interested in making a parametric model to use for different products. My goal was to make it easy to modify critical parameters to allow it to replace most…
PS5 SLIM REPLACEMENT MOUNT FEET PRINTED AT .4 10% INFILL ON ENTINA 2 PRINTER
Settlers of Catan replacement parts(city, settlement and bridge) I create this things during the last jear. The models are close to the original parts. Print instructions print settings: LH: 0.1mm Nozzle: 0.3mm
The bracket of my HyperX Cloud 2 headset broke, so I modeled and printed a new one.
Replacement sliders for Beyerdynamic DT 770/880/990 headphones. Yes, you can buy original replacement parts – for an insane price! Also they will break after a short time again because they are just too fragile. This is a remix of…
My battery cover had fallen off due to abuse and machine coolant exposure, which degraded the original cover. This is a replacement cover for the Milwaukee M12 battery, this works for the small stubby type shown in the picture. It clips…
REVISION HISTORY 2023-09-13: v1.02 - Added the option to create nozzles with wings 2023-09-11: v1.01 - Modified the code to allow customizing the skirt height , adding a needle and/or stem to the nozzle 2023-09-10: v1.0 Released…
So the power button of our Apple TV Remote dropped out. Went to the Genius Bar to confront Apple with the bad design, but they said it was not repairable. A freaking button! Talk about being a super sustainable company! Anyway, I've made…
Needed a replacement nut for our lampshade, so I made one. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 20% Filament: Prusament PETG Signal White
This model is best printed on its side or with the clip assembly at the top of the print. I advise against printing it flat, as when you insert it into the fan's foot slot it will split (unless you have adamantite layer adhesion lol).…
My AMS started to fail when loading/unloading filament, i discovered that this little piece broke, so i asked my colleague to model it. I just installed it in my AMS and works just fine :) I hope i could help you if you have the same…
I created this model because when I tried to replace the battery in my Wahoo Tickr the cover's pins deformed and snapped. It would no longer seal with only two pins available so I designed this replacement cover for myself. I went through…
tl;dr If you want to switch between E3D nozzles on your CORE One, you should use this tool instead of the original. Because for E3D nozzles the heater block needs to be installed higher, the original nozzle replacement tool is…
This is a simple 75mm spray nozzle extension für WD40 or other aerosols ;) different shaft-diameters added (2,8mm / 3,0mm / 3,2mm / 3,4mm / 3,6mm) to fit more aerosol-cans (for WD40 3,0mm-version should fit)
Printable pins replacing the screws allowing for a fully printable model without the need of fasteners. No modification of the box is required There are 3 different pins that are slightly different. 2 of each need to be printed, and…
Second third and fourth picture are to show the difference between the original and the 3-D printed one original one is on the left and 3-D printed one is on the right To see the to see the original thing from Nintendo…
Simple and easy to print replacement-nut for the pressure hose of the SodaStream Crystal 1.0 and 2.0 and SodaStream Jet. If you have the option, select the "Nut.stl" file. The other file, "Nut_Co2_side_slim.stl", is designed for the side…
Printing Instructions Print without supports and at 100% infill. If using PrusaSlicer, I recommend disabling “Thick bridges” and enabling “Detect bridging perimeters”. If you have assembly issues with the holes being too small, you can…
I love the Open RC designed by Daniel Noree but I didnt just want the same car everyone else had. So I decided to design my own. And what car is more iconic than the 1989 Batmobile. Unfortunately when I deicided I wanted to design my own…
This is a replacement battery cover for the PSP 1000. Things you need to be aware of: This is suitable for only the PSP 1000. It is not designed for any of the later models. The thin tabs on the bottom of the cover are fragile, if you…
Suppose your favorite glasses are broken. Usually this is frame, temple or - most likely - the hinge. But the lenses are OK. But hey - we have our 3d-printer and enjoy 3d design and printing. Let's design and print our glasses using the…
I designed this to fix my TV stand. I bought it second hand so I don't know the brand but this piece looks like any other I've come accross. The diameter is 14.65mm and the depth is 11mm. I used calipers to measure the existing one I had…
Update: 10.06.2024 - additional 12 gears added This is a set of 22 replacement gears with different inside and outside teeth amout. Size of the internal hole for the axle: 3.2mm Let me know if you require any other gear to be created. 3D…
NEW VERSION v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the added…
UPDATE The camera mount was working but when there were fast short movements with many direction changes it started to wobble. I added a V2, it doesnt look as nice but it is more stable. If you are into timelapse videos then you…
***This Frame is fairly fragile. It will not survive moderate impacts*** I wanted to experiment with 3D Printed frames after snapping one of the plastic pins on my Mobula 8 Frame. This is my first attempt (well, first attempt that…
Replacement rivet for crocs.
After breaking and losing a bag strap buckle and searching for a 3d design to print and replace it, I realised that a fully parametric replacement strap buckle clip thing would be really handy, so I could … retro fit it to fix the one I…
These are not go over guards and replace the stock removable cage! (See Pics) They are tested in my own reef tank! They provide a cleaner look then a go over guard and the added safety of one! No more daily cleaning of quick to clog foam…
Replace noisy hot end fan on the Sprite Extruder with a quiet 5015 blower fan. This is a remix of the Ender 3 S1 Hotend Fan 4020 Replacement Bracket . This remix mounts a 5015 blower fan instead of the 4020 blower and is further offset…
I didn't see any replacement parts for the MK3S on here so I decided to upload them for easy access. I didn't like having to go to the Main Prusa page to get these files individually so I put them all into their respective folders for…
I recently noticed some cracks in the plastic of my Ender3 v2 X axis tensioner body around the front and back screws. And I really don't know why it happened.. I searched internet for a replacement part since I didn't want to buy the…
UPDATE 3: IMPORTANT only use these new files with the cutout for the U.FL socket (see images). The old design by BetaFPV likes to knock the U.FL right off the board… Ask me how I know. If you're in a similar situation, I wrote up a quick…
This is a direct replacement lid for 40oz Stanley The Quencher Tumbler. My wife's tumbler was knocked off the bleachers at a baseball game the other day breaking the lid. Instead of buying the $10 replacement, she ask if I could give it a…
I wanted to make a transparent back for my Nintendo Switch, so I measured and modeled a replacement for it. Well, this took quite a bit of effort. I've never modeled anything this specific before so it took a few tries to get it all right…
Replacement sides for a Milwaukee Fastback Compact. Change the knife to a custom color or add a logo or text. For example, my buddy wanted one that said Makita! Print recommendations: Layer Height: 0.20mm Infill: 25% Cubic or Gyroid…
NOTICE: Please know this may evolve as I unlock more missions in the game. NOTICE 2: Because of how tight the tolerances are on the upgraded wire holders, you need to make sure they are nice and flat. If they are curved/bent, they will…
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== I saw the model from xoid but the zipper I needed…
I had an ancient Pi Zero I wanted to use again, but the old CSI port for the camera had long lost its clip. They're incredibly brittle. So, I just made a new one to plug in. This is still experimental, but it's working so far. The little…
NOTE: This is an imperfect solution - and I've since moved on and replaced my old XM3s. As such, I'm not able to improve this model any longer. Feel free to remix the model - I'm happy to share my source tinkercad model if you reach out…
This is a replacement headband for the Razer Kraken X with functional adjustability! I recommend printing with PETG because PLA is too stiff, but you do you. To get the side pieces off the original headband, you need to use a thin metal…
not gonna lie, been a pita to print these on my Resin printer (Elegoo Mars 2 pro). 90% failure rate so far, but the few that were successful (or partially) allowed me to verify they are indeed a good replacement fit for the original. So…
One of the triggers was broken on my PS4 controller, and I decided to 3D model some new ones instead of replacing them with generic replacements. These are flat replacement L2 and R2 buttons for the first gen PS4 controller (CUH-ZCT1).…
If you have an integrated Garmin support and broke the plastic part, this one is for you ! WARNING : it's designed to work with the aluminum support, not alone (see photos) Print instructions Category: Sport & Outdoors Summary If you have…
I had my logiTech headset for a few years but the plastic caps broke and i wasnt able to find any replacements, since the last version that i uploaded i have added two small pins to the inside cap the pins hold the metal part that is in…
DESIGN INTENTS Replacing thumbsticks that are damaged on PS4 controllers Design for 3D printing (and not a blind replica of the original) Overhangs and bridges have been adjusted to work on any calibrated 3D printer Stick is a little bit…
The Beats Studio 3 headband commonly breaks where it meets the folding articulation. Mine were not spared. May also work for other Beats Studio, Studio 2 and Studio Pro. This was only tested on the Beats Studio 3, for which it is a…
E3D Fan Duct Replacement Rear-mounted x-carriage replacement fan duct for Prusa Mini/Mini+. Designed to improve part cooling with E3D hotend and heatblock, but will also work with stock hotend assembly. Duct geometry is based on the…
This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…
My Steelseries Apex keyboard recently lost one of its rear feet during a move, and Steelseries support doesn't sell or provide replacements. This is a model for a replacement foot that roughly matches the stock foot – it's not an exact…
Replacement Gear for the PC-Engine CD-Rom2 (as they have a tendency to swell up/break) Due to this being absolutely tiny, requires a SLA/Resin printer to properly print. Has been tested in well over 50 machines around the world (I have…
My head torch broke randomly when I was out on a hike and changing the batteries. I'd only had it for a month or two when it happened and didn't want to just throw it away because it cost a good £30. All that had broke was the latch that…
As I could not find any really good models of the standard Victorinox Toothpick, I designed my own in a few iterations. This is now the fourth version. It fits all my (by now relatively large selection of) Victorinox Swiss Army Knives…
The tie wrap they tell you to put on the X-Axis to hold the cable crushes the cable and will damage overtime. Here is a fix to keep your cable flat and in good condition and not being crushed. Print Intrusions: PLA or better 100% infill…
PLA is ok, I would recommend ABS because it has some flex. 0,2 mm Resolution 40 % Infill Tree-Support
Description: Revamp the look of your Audi wheels with the Audi Hub—a custom-designed replacement wheel center cap that combines functionality with flair. This hub boasts a sleek design and innovative features, making it the perfect…
Adjustable legs for simple furniture repairs, the ones I found at the local store were too large so I made these ones. They install with 2 screws each, and come in either horizontal or vertical attachment variants. The vertical attachment…
Remix of a remix of a remix, I really wanted the replacement to be as similar as possible to the original part, so I added a Beyerdynamic logo and L/R indicators. IMPORTANT: Printed with a 0.25mm nozzle using Prusaslicer 2.5 with Arachne…
These Elite compatible darts resist the deformation that occurs with foam providing better accuracy and less jams. These darts are best printed in the most flexible TPU possible to allow the best barrel seal and less pain for those acting…
This is a simple replacement hinge for the Sony WH-1000XM5 headphones, that comes in handy, when your hinge breaks. Note, that this part is for the RIGHT hinge, If your left hinge is broken, just mirror the ‘Earpiece (Meshed)’ Part before…
UPDATE: I have replaced the files with STEP so it's easier to remix as QIDI changed up the mounting locations and i don't have acces to this data. Attempt this fix at your own discretion! Only work on the heater with the power off and the…
Since Logitech doesn't provide any spare keycaps for the MX Keys keyboard, and I didn't want to buy a completely new keyboard I decided to try and make a replacement my self. Once installed it works and feels just like the original. As…
Replace the Wheel in Magic remotes from LG which are prone to break in the original. Although the model has intricate details, for me it worked better when printed on a FDM printer than with resin (I tried both). The reason is, my resin…
I modified the 400 series latch file to match the 450 series. Printed on Ender 3v2 with brim and support touching buildplate, overhang angle 59°. Layer height 0.16mm and infill 100%. I set the supports touching the print and removed it…
After replacing my X axis Belt tensioner I decided to change my Y axis belt tensioner too. Yet again another Quick'n Dirty remix of Cornaly_Cool's design https://www.thingiverse.com/thing:3289057 . You will need to use the original bolts…
The blade length and hub measurements match the original, but I sort of eyeballed the angles of the fins. The hub fits snug, but should press on fine. I've been running this for a year in my shop and I can't tell a difference between the…
The Ender 3 S1 has been a great machine so far except for the loud hotend fan. I had a spare 4020 blower fan so I designed this bracket to replace the one found on the sprite extruder. Even at 100% I've found it to be quieter than stock,…
The little white release button on my son's stroller broke, so I designed this replacement. The original is ABS, so you should print in ABS or ASA. Also, for some reason, it turned out a tad bit small for me, so I might recommend scaling…
I reinforced the standard holder because it was too weak.
During a recent game it became clear. The people need an option for a larger vehicle. I set out to design a 10 passenger vehicle. A bus if you will. I also created a replacement car should you need one and more importantly replacement…
The foot / leg on a Logitech keyboard broke, this is a replacement. In one of the photos I have shown the original foot (grey) and the replacement (black) side by side.
Replacement toothpick for the small Swiss Army Knife. The g-code file is .05mm Ultra-detail for the Prusa Mini + in PLA and takes about 7 min to print. In the Cover Photo, the green one furthest away is the print. The white/yellowish one…
A windstorm last year made my skeleton take a great fall, and a forearm mount was one of the casualties. I made a 3D-printable version so I can get him back up this year! Printing tips: Use PETG or a more durable material to avoid warping…
A replacement for your g29 clamps if they break. recommending using 50-90% infill and using sandpaper and some tweezers to remove supports.recommending using trees ports that only touches the build plate Also it's smart to grind away the…
My button broke, so i printed this replacement. Fits perfectly. Printed in Prusament PETG on PrusaMini+ w/ support
Update 18 Jan 2024 Increased infill to 50% Triangle Server rack screw and cage nut replacement. I designed these to be an easy fit for any 1U or 2U items that fit on a standard 19" server rack. Printed in PTGE, PLA, and ABS. .2mm layer…
Step file also included for anyone who wants to tinker around with the model. I don't have a printer which fits the size of the model, so it's untested, if you do however print one yourself please let me know if it fits (and if not, I can…
I whipped this up quickly last year after a some of the plastic flowers in my hummingbird feeder got too brittle from age, and the petals broke off. The hummingbirds don't seem to care about the number of petals or how they look. The new…
One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…
Made for the Replacement Parts contest. The core model is a functional replacement for Presta and Shrader type dust caps as round on most cars and bicycles. After printing check internally for any hanging plastic which could depress the…
To build this - you will need one of each of these parts that are included (Choose one of the cylinders that is included) - along with a Bic Pencil spring (the ones that are hexagonal and look like this:) , and a toy screw or 4-40 x 3/8in…
This is a replacement part for the Sony WH-1000XM4. So Recently my favorite pair of headphones that i've had for the past 4 years, finally broke, from my research I found the hinge breaking on the Sony WH-1000XM4 Headphones is pretty…
A replacement desk clamp for scissor-arm microphone boom stands. If the original clamp on your mic arm broke or went missing, this is a printable substitute. The hole for the mic arm post measures 13mm. Files included Mic Stand Clamp…
The first model (bracket.stl) is an upload of this model : https://www.thingiverse.com/thing:5407780 The second one (bracket_mod.stl) is the modified version with a groove to insert the wires. No need to unsolder/solder the wires to…
SEGA Master System D-Pad Versions Please check your controller against the identifier list, to see which version is required for yours. There are 3 different variants, and they all have slightly different dimensions, making them (mostly)…
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== 3D printable replacement parts for a standard…
