1 / 6
Server Rack 1U and 2U Mounts (Screw and Cage Nut Replacement) — zdjęcie 1
1 / 6

Server Rack 1U and 2U Mounts (Screw and Cage Nut Replacement)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix for replacing standard 6mm screws and cage nuts on server racks. 1U and 2U models provided.

Ocena
4,8 / 5
Polubienia
120
Pobrania
1007
Wydruki
8
Wyświetlenia
4603
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Update   18 Jan 2024
Increased infill to 50% Triangle

 

Server rack screw and cage nut replacement.

I designed these to be an easy fit for any 1U or 2U items that fit on a standard 19" server rack.

Printed in PTGE, PLA, and ABS.

.2mm layer height
6 wall loops
5 top shell layers
3 bottom shell layers
50% Triangle infill
No supports
(Orca Slicer 0.2mm Strength profile for Bambu Lab Carbon X1 0.4 nozzle)

If you experience issues with the fasteners and bed adhesion; recommend adding a 5mm exterior brim to the fasteners (I have had success with and without).

Do not over tighten.

These have not been load tested, use at your own risk.

Tagi