Server Rack 1U and 2U Mounts (Screw and Cage Nut Replacement)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix for replacing standard 6mm screws and cage nuts on server racks. 1U and 2U models provided.
- Rating
- 4.8 / 5
- Likes
- 119
- Downloads
- 1,000
- Makes
- 8
- Views
- 4,577
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 18 Jan 2024
Increased infill to 50% Triangle
Server rack screw and cage nut replacement.
I designed these to be an easy fit for any 1U or 2U items that fit on a standard 19" server rack.
Printed in PTGE, PLA, and ABS.
.2mm layer height
6 wall loops
5 top shell layers
3 bottom shell layers
50% Triangle infill
No supports
(Orca Slicer 0.2mm Strength profile for Bambu Lab Carbon X1 0.4 nozzle)
If you experience issues with the fasteners and bed adhesion; recommend adding a 5mm exterior brim to the fasteners (I have had success with and without).
Do not over tighten.
These have not been load tested, use at your own risk.