Shower Hair Trap (Duschsieb)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shower hair catcher (39mm diameter) that prevents clogging of the drain.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
A shower hair trap desinged in such a way that it doesn't completely clog up even if it has some hair in it. It can easily be taken out to remove the hair.
As the picture shows, the drain has a diameter of 40mm, the diameter of the inner circle is approx 10mm. There is a cross at a depth of 20mm (on the photo barely visible).
Print with PETG at 0.2mm layer height without supports or brim.
Edit: Version 2 is completely reworked, this time in Fusion (Version 1 was designed in tinkercad :o). Since I did not want to clean the sieve every few days, the top of the hair trap now extends about 2 cm over the drain hole (the total height of the V2 sieve is approx. 4 cm).