Bathroom Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of accessories for the bathroom. - Towel-holder with matching hooks - Toiletpaper-holder - corner-shelf
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed some towel holders with hooks and had some 16mm tubes lying around.
I tried to make the CAD-file as parametric as possible so you can adapt to other tube dimensions.
I also made a corner shelf for the toiletbrush to get it out of the way for the cleaning robot. And to have a matching set also a holder for the toilet paper.
The mounting pieces are designed to be glued to the wall with doublesided tape. But there is also a hole for screws if you prefer to mount it that way.
You can always take the accessories off the mounting plates for better cleaning. The mounting plates have a tolerance of 0.15mm. For me that works best. But if you want to change that, just change the parameter in the Fusion360 file.
This way you can also change the tube diameter if you already have other ones you want to use.