MadMax Dock Front Extrusion Relocation Bracket – 20mm Forward / 44.5mm Down For Mercury One / Ender 5 Frames
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MadMax Dock Front Extrusion Relocation Bracket – 20mm Forward / 44.5mm Down For Mercury One / Ender 5 Frames
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
MadMax Dock Front Extrusion Relocation Bracket – 20mm Forward / 44.5mm Down
For Mercury One / Ender 5 Frames
This relocation bracket repositions the MadMax dock on Mercury One.1 or Ender 5 frames. It mounts horizontally to the front 2020 extrusion, shifting the dock 20mm forward and 44.5mm downward — enabling proper tool alignment and reliable tool changes with the MadMax Toolchanger system.
🔧 What It Does:
Shifts the MadMax dock 20mm forward and 44.5mm downward
Designed for horizontal mounting to the front 2020 extrusion
Solves clearance issues on Mercury One-style frames
Based on the open-source repo:
🔗 MadMax Toolchanger GitHub
✅ Compatibility:
Frames: Mercury One.1 / Ender 5
Toolchanger: MadMax
Dock Mounts: All MadMax-compatible docks
Toolheads Supported: DragonBrick, OmniBurner, A4T, AntHead, Yavoth, RapidBrick, A4TBrick, OmniBrick, XOL
Tested On: Mercury One.1 Hydra with 275mm bed
🖨 Recommended Print Settings:
Material: PETG, ABS, or ASA
Layer Height: 0.2mm
Infill: 40–50%
Supports: Not required
📦 Hardware Needed:
4x M5x8 bolts
4x M5 T-nuts (for 2020 extrusion)
(Optional) Threadlocker for vibration resistance
🧪 Notes:
Verified on a 275mm Mercury One.1 Hydra
Ensures precise dock alignment and tool pickup