1 / 3
Delta-P fan duct V2-R2 for MK3S(+) - Remixed with ADXL345 mounting holes — zdjęcie 1
1 / 3

Delta-P fan duct V2-R2 for MK3S(+) - Remixed with ADXL345 mounting holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Need a new fan duct and somewhere to mount your ADXL based accelerometer like I did? Look no further!

Ocena
0 / 5
Polubienia
3
Pobrania
12
Wydruki
0
Wyświetlenia
209
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

All I did was add two m3X12 hex socket friction fit mounting holes to an existing model. You need to visit the original to get the other half (V2R2.2 Cover.stl) that this attaches to. This model otherwise prints and assembles the same as the original.

The holes are 11mm deep and meant to accept and thread/friction fit an m3x12, but will readily accept a shorter m3. I simply went with the 12mm because it was the only screw I had lying around at the time.

I'm sure that this isn't the optimal place to mount the ADXL, but I needed to upgrade my fan duct anyway and didn't feel like completely disassembling and reworking my entire extruder assembly. So this works for now.

Tagi