Tool Holder for LEOTE_approach's K1/K1C/K1SE Side Panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed a great K1 series tool holder to fit LEOTE_approach's side panels
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is remix to allow you to mount a K1/K1C tool holder to the same printer' Side Panels created by @LEOTE_approach for the K1/K1C/K1SE.
I also have a Multiboard compatible version in my profile.
Printing
0.20 Layer Height
No Supports
10-15% Infill
If you printed the panel and tool holder with ABS - It should be a snug fit.
If you printed the panel and tool holder with PLA - It should be a snug fit.
If you are printing this tool holder in PLA and the panel was printed in ABS - You should compensate for ABS shrinkage by downscaling the PLA print. (I only downscaled to about 99.9%)
Thanks
Credit to the amazing work of @LEOTE_approach Link here: