Goose Belt Purger (GBP) – Automatic Belt Purge System for Voron Trident & 2.4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple, light and low-cost belt based purger for 3D printers. Designed for Voron Trident and 2.4, adaptable for others
- Ocena
- 4,8 / 5
- Polubienia
- 204
- Pobrania
- 373
- Wydruki
- 8
- Wyświetlenia
- 4039
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Automatic filament purge tool for Voron/CoreXY printers
The Goose Belt Purger is a compact, modular add-on for Voron-style printers that simplifies purging during tool changes. Ideal for multi-material setups or frequent filament swaps. Designed for reliability, easy integration, and minimal impact on print space.
Its purpose is to ensure your nozzle is properly purged and primed at the begining of your print and between filament changes (automatic or manual). Unlike other solutions it does not steal your valuable buildspace or produce bulky “poops”. Instead it creates clean sticks or pellets outside your bed. And it does so without any manual interaction, even for manual filament changes.
🔧 Features:
Simple design: just a DC motor – no servos, extra electronics, or firmware mods
Leaves behind clean, compact purges — no spaghetti, no blobs.
Compatible with filament swapping mods and with integration into AFC and Happy Hare
Small footprint, fast installation
Tested on Voron Trident and 2.4, adaptable to other CoreXY builds
📦 Includes:
STEP files, build instructions, and Klipper configuration file with macro
Open-source design — contribute or modify freely
💬 Questions or ideas? Join the GitHub, Discord or leave a comment!
22.08.2025 - Configuration updated to v0.7.2
10.10.2025 - CAD updated to a012 version, official support for Voron 2.4 added
17.03.2026 - Reference to a new control macro (Goose Purge Macro) added (v0.8.2)
For print instructions click here.
For assembly instructions click here.
For information on software click here. A repository with the macro is here.
If you would like to add a waste bucket designed for GBP, have a look at this model.
⚠ Important – Protect your electronics!
The purger runs from any regular fan port – no stepper, no fancy stuff. But it is a motor, and motors can bite. 🦷
To avoid frying your controller 🔥, you must add a few basic protection components (they’re cheap and listed in the BOM).
📘 Full instructions are on GitHub – don’t skip this step!
Bill of Materials (BOM):
Purger
1x Silicone wristband (12 mm wide, 200 mm circumference) - you may already have one at home
1x DC motor, 12 mm diameter, 6V/12V, 15rpm — commonly sold as GA12 N20 or N30. See note below.
3x 623 bearings
2x 6x3 mm magnets (Voron standard size)
3x heat-set insert M3x5x4 (Voron standard size)
If your board supports 5V on fan outputs, you may use a 6V motor. If only 24V is available, use a 12V motor with <50% PWM.
M3 hardware:
1x M3 nut
1x M3 nylock nut*
1x M3x6 set screw
1x M3x20 SHCS*
2x M3x20 FHCS
1x M3x30 SHCS
*) If you have trouble getting a M3 nyloc, you can instead use HSI variant of arm - replace nylock nut for one more heat-set insert, M3x16 SHCS instead of M3x20 SHCS and get some threadlocker
Protective electrical components:
Schottky diode 1A (e.g. 1N5819) - For 5V or 12V supply voltage
orSchottky diode 2A (e.g. 1N5820) - For 24V supply voltage together with 12V motor
Resistor 47R
Ceramic capacitor 10 nF, 50V
If you don't like the idea of soldering those parts, you can get yourself fantastic MicroFlip board, which already has everything.
_____________________________________________________________________________________
Although the GBP is completely original work, its printer mounts are not. At this moment are included mounts based on:
AT_Brush (Published under GPL-3) - Credit goes to ArmoredTurtle team
Klicky-Probe (Published under GPL-3) - Credit goes to jlas1
Thank you for your work!
_____________________________________________________________________________________
If you find this project useful, please consider sharing a make to increase its visibility. If you would like to support me directly, you can do so through Ko-fi