1 / 7
Galaxy Watch 8 Dock and Display (40, 44, Classic, Ultra) — zdjęcie 1
1 / 7

Galaxy Watch 8 Dock and Display (40, 44, Classic, Ultra)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Charging Dock and Watch Band Holder for Samsung Galaxy Watch 8 44mm, 40mm, Classic (Ultra 2025 is still untested)

Ocena
4 / 5
Polubienia
49
Pobrania
602
Wydruki
9
Wyświetlenia
1590
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

UPDATE: Classic model has been tested to fit by @GrzegorzPora_1290597, thank you!

UPDATE: I adjusted the 40mm model, and now it has been confirmed to fit by @3dprinttech_4130516, thank you!

I designed this charging dock specifically for the Samsung Galaxy Watch 8 44mm, but I've also included models for the Classic, 40mm, and Ultra 2025 (untested).

While I've done my best to design a dock for the Ultra 2025 watch, I am unable to test the fit for it because I don't have the physical watch to compare, nor do I know anyone who has one to lend me. If you'd like to risk it and print one, I would appreciate feedback so I can tweak the design if needed. I'm mainly interested in the the part that cradles the side of the watch; not so much the curve matching exactly, but the cradle itself being in the right place so the watch isn't too high or too low for the charger.

First pass the USB-C connector through the hole front to back. The charging puck can be friction pressed into the hole, and the metal casing should be flush while the plastic charging surface should stick out.

I'd love to see your makes! If you enjoy the design, please hit the Like button. It really helps!

Print Settings:

  • Material: Whatever

  • Layer height: Looks good at 0.2mm, maybe enable supports if you go thicker

  • Supports: None at 0.2 and below. (I notched out a small peak at the top inside of the charger's hole to eliminate sagging)

Tagi