LayersFactory
Zgłoś model
1 / 6
Pingumote (WIP) — zdjęcie 1
1 / 6

Pingumote (WIP)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial
SzczegółyWydruki i komentarzeRemiksyKolekcjePowiązane

Intro

A collection of housings and accessories for Pingumote, an ESP32 based remote for VESC-based onewheels, using the Pubmote software and the Cowmote Gen 2 PCB (available soon).
 

Multiple housings and variations for 3DP and CNC will be made available as they are validated.

Currently planned housings:

  • Puck and mini puck
  • Bar (inspired by Flipsky VX4 with 3DServicas-style variant)
  • Bar/puck hybrid (inspired by the Elofty Orion)
  • Nunchuck (inspired by BKB Voyager and similar remotes)
  • Watch

BOM

Cowmote Gen 2 PCB
PS5 Joystick module (harvest sensor for custom thumbwheel/slim variants)
6x2mm diametric disc magnet
603450 or 104040 lithium pouch battery (depends on the variant)
LRA (for haptic feedback)
Panel mount USB-C connector
2,3,4 and 6 pin molex picoblade male connectors (mx1.25 on aliexpress)


“Voron spec” m3 heated inserts for 3DP models

 

Manufacturing

Recommended material: ABS (preferred) or 72D TPU

Printing


Supports: enabled
Wall count: 4
Infill: 40% or more (use solid infill and vapor smoothing if you want clear parts)
 

Assembly

Instructional pictures to come.

 

About Pubmote

Information on the pubmote/pubremote project is available here:
https://github.com/contactsimonwilson/pubremote

Tagi

hoytremoteonewheelvescvescwheelvescxrvescpintpubmotevx4vescexpresspingumotebkbremotetiltpubremote