Modular Sunglass stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a modular sunglass stand for my Oakley obsession.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 824
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modular sunglass stand that you can print and stack as many as you need. Print a base (with or without void to add weight), a top, and as many middle parts as you need. Mine is 7 high with a weighted base and it's pretty stable. If you know you won't need to adjust, you could glue them together.
I printed in PLA+ with 2 walls, and about 6-8% cubic infill. If you print the base with the void, just pause the print before the void lid prints and fill with junk metal. I topped the metal pieces with some hot glue so they would not rattle around. If you do, be careful with the heat from the hot glue ;)
Happy Printing!