Modular Sunglass stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a modular sunglass stand for my Oakley obsession.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 90
- Makes
- 1
- Views
- 824
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modular sunglass stand that you can print and stack as many as you need. Print a base (with or without void to add weight), a top, and as many middle parts as you need. Mine is 7 high with a weighted base and it's pretty stable. If you know you won't need to adjust, you could glue them together.
I printed in PLA+ with 2 walls, and about 6-8% cubic infill. If you print the base with the void, just pause the print before the void lid prints and fill with junk metal. I topped the metal pieces with some hot glue so they would not rattle around. If you do, be careful with the heat from the hot glue ;)
Happy Printing!