Corner Blocks for Band Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These corner blocks turn an ordinary ratcheting tie down strap into a four corner band clamp. They are used to clamp…
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 264
- Wydruki
- 5
- Wyświetlenia
- 1095
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
These corner blocks turn an ordinary ratcheting tie down strap into a four corner band clamp. They are used to clamp boxes while gluing them together. The blocks are designed for 1" wide straps such as these from Amazon.com: https://www.amazon.com/Secure-Sling-Strap-U07000101500015-Strength/dp/B077S5NG4N
Thread the strap through the blocks.
I printed my blocks in PLA with 5 perimeters, 7 top and bottom layers, and 20% infill. Using ABS would make them even stronger. You can also use the more standard 3 perimeter and 5 layer top and bottom and increase the infill to around 50%.
I included photos of my box project for which I designed this clamping system. These clamps work well with boxes with mitered corners. The clamp tends to pull the corner miters into alignment.
Category: Hand Tools