Corner Blocks for Band Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These corner blocks turn an ordinary ratcheting tie down strap into a four corner band clamp. They are used to clamp…
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 264
- Makes
- 5
- Views
- 1,095
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
These corner blocks turn an ordinary ratcheting tie down strap into a four corner band clamp. They are used to clamp boxes while gluing them together. The blocks are designed for 1" wide straps such as these from Amazon.com: https://www.amazon.com/Secure-Sling-Strap-U07000101500015-Strength/dp/B077S5NG4N
Thread the strap through the blocks.
I printed my blocks in PLA with 5 perimeters, 7 top and bottom layers, and 20% infill. Using ABS would make them even stronger. You can also use the more standard 3 perimeter and 5 layer top and bottom and increase the infill to around 50%.
I included photos of my box project for which I designed this clamping system. These clamps work well with boxes with mitered corners. The clamp tends to pull the corner miters into alignment.
Category: Hand Tools