Flexible Mesh / Sheath Designed for Ice Screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mesh designed for ice screws to protect the threads & shaft. Can also be used for similar applications & objects.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- GNU General Public License v3.0
A flexible mesh primarily designed for ice screws to serve as a replacement cover if the ones get lost. However, can definitely be used for other applications for similar sized objects, should be able to scale up/down somewhat but nothing too crazy (unless you are evenly scaling in all dimensions.
Designed for TPU / other flexible materials. I used 95A TPU, however it should work with others, I have just not tested it yet.
There are 3 models, all have the same overall dimensions its just the pattern that is different. I believe ice_screw_mesh_v3_t-filled is the best one to use.
For ice screws, I found you want the X length to be approximately (diameter of threads * 3.14) + 12mm - I found this gives a decently snug fit but no so snug its difficult to pull off.
For assembly, you just print and then push the tabs through the holes and then you should have a nice cylindrical shape.
A copy of the drawings can be referenced here: https://github.com/UrbanPistek/projects-monorepo/blob/main/laser_cutting/snow_card/media/v3_1.2mm_drawing.png
