1 / 2
Parkside Electronic Screwdriver Charging dock + Multiboard mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charging station for the Parkside electronic screwdriver.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 21
- Wydruki
- 2
- Wyświetlenia
- 169
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The charging station is designed to be compatible with the screwdriver's standard charging cable. The standalone version needs to be attached to something, otherwise it's too light!
Assembly:
- Insert the charging cable into the upper part. (It should fit snugly. Adjust your print settings accordingly.)
- Screw on the lower part, with the cable protruding through the small hole. (Any suitable screw should work, as it's only screwed into plastic.)
- All screws must be flush! If a screw head protrudes beyond the intended hole, it won't work.
Additional notes:
- Make sure the screws are not too long so they don't damage the cable.
- You might want to use a stronger material for printing to increase stability.