1 / 2
Parkside Electronic Screwdriver Charging dock + Multiboard mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Charging station for the Parkside electronic screwdriver.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 21
- Makes
- 2
- Views
- 169
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The charging station is designed to be compatible with the screwdriver's standard charging cable. The standalone version needs to be attached to something, otherwise it's too light!
Assembly:
- Insert the charging cable into the upper part. (It should fit snugly. Adjust your print settings accordingly.)
- Screw on the lower part, with the cable protruding through the small hole. (Any suitable screw should work, as it's only screwed into plastic.)
- All screws must be flush! If a screw head protrudes beyond the intended hole, it won't work.
Additional notes:
- Make sure the screws are not too long so they don't damage the cable.
- You might want to use a stronger material for printing to increase stability.