Customizable Shelf Railing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for customizable shelf railing, e.g. for wooden shelf with rods.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a customizable adapter for a shelf railing, connecting plate and a rod. Best use for wooden shelf and railing parts.
The model has a satisfying snap fit for the 20 mm rods. The teeth hold best on wooden shelfs. It also has a hole to fit a 3 mm screw, but I did not need it since the fit was pretty tight.
I used 17 mm wooden plates and 20 mm rods, but you can adjust the sizes in fusion 360.
It is surprisingly stable even with PLA.
You can use multiple adapters for longer rails.
Please give me some feedback, and feel free to customize and upload fusion and stl files, if you have improvements.