Multiboard Tray of varying Lengths/Widths
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiboard Tray of varying lengths and widths using multiboard threads
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Multiboard trays of varying lengths and widths. All numbers are in millimeters unit. Spent a lot of time making it both strong and filament light. I have placed a 10 pound weight on my 200 length by 100 width and it held up fine. Little lip to both keep things in as well as a way to assist grabbing smaller items.
I learned openSCAD to make this and one huge benefit is its all parametric so if you want taller, wider, or longer trays please let me know I just figured 55 was too many already.
If you don't want a precise fit check out the common sizes!
You attach them with 1 or 2 large threads I used
9 mm big thread flat head push fit hole
But I've tested with a whole bunch of various of the 9mm big threads.
- Looking for a multiboard hook with catch look here → HOOKS WITH CATCH
- Looking for just multiboard hooks (no catch) look here → HOOKS
- Looking for a multiboard small screw driver/needle file holder look here → SCREWDRIVER/FILE HOLDER
If you used them please leave a like. If you notice any error please tell me so I can correct them. Happy Printing!
NOTE this is a multiboard item and as such will strictly follow - https://www.multiboard.io/license.