Fight Stick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Old school cool arcade game controller for RetroPie.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I designed this with a friend for a RetroPie and I wanted to print it in one piece to the ol' Ender3V2. (https://retropie.org.uk)
It was inspired by this model, but it was modeled from scratch.
https://www.thingiverse.com/thing:4892411
It was intended to be used with on of those Aliexpress arcade controller kits.
The board we used is an SJ@JX, there's 6 main buttons (30mm each) 2 more (30 mm) buttons in from of them and Start and Select (24 mm in the front of the joystick)
Apologies for the questionable CAD practices, I am still new at this.
Fasteners:
- bottom cover: 10 x 2.5mm screws
- board: 4 x 2.5mm screws
- joystick: 4 x M4 nut and bolt
Print Setting:
- filament: PLA (anything will work probably)
- temperature: 215C
- nozzle: 0.4mm
- layer-height: 0.20mm
- perimeters: 3
- infill: 15%
- external perimeters first
- fuzzy skin (I used super light settings 0.1mm if I remember correctly, it gives it s super nice finish and hides the Z artifacts that the old Ender3V2 tends to make)