1 / 1
CR18P Juice Up magnetic body mount for 10mm magnets — zdjęcie 1

CR18P Juice Up magnetic body mount for 10mm magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My own spin on a magnetic mount for the CR18P Juice Up Edition.

Ocena
5 / 5
Polubienia
12
Pobrania
70
Wydruki
1
Wyświetlenia
306
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

I wanted to use a magnetic mount for my cr18p, but none that I found matched what I wanted so I made a set.

My targets:

  • use 10mm magnets (round or square). They can be up to 2.35mm thick.
  • do not raise the body
  • minimal supports required (they are required on the part that attaches to the body, with the round pegs)

Tagi