Hotbed Filament Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small tower with 4010/4020 fan to dry a filament spool on your 3d printer bed.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
A small tower with 4010/4020 fan to dry a filament spool on your 3d printer bed.
When printing the tower, create a cylinder modifier 100x100x1 mm centered on the part. Give it 0 top and bottom layers with a grid infill (~40% to 45% should be good) to create a mesh from the base. When done, fill the center tower with large desiccant crystals and screw on a 4010/4020 fan on top.
Use the attached dryer gcode files to dry your filament. Please note these files do not include any homing so home the printer and move the hotend out of the way (to Z 200 preferably).
You will also need a cardboard box (with an aluminum foil lining) sized to your spool with a height of 100mm to place over the spool on the bed.
Printed with ABS.