1 / 6
IKEA Skadis Prusa Spool Holder Adapter 2xM8 Screws — zdjęcie 1
1 / 6

IKEA Skadis Prusa Spool Holder Adapter 2xM8 Screws

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for Prusa Spool Holder, mounted to IKEA's Skadis board with two M8 Screws and (optionally) heat set inserts.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
35
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print with PETG or ASA/ABS on standard settings (15% infil, 2-5 perimeters, no supports).

Place it on the side, so layers goes top-to-bottom, not across the piece - it should give you better durability.

You will need 2xM8 screw which you can drive directly into plastic holes but I recommend using also heated inserts.

Tagi