1 / 6
IKEA Skadis Prusa Spool Holder Adapter 2xM8 Screws
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for Prusa Spool Holder, mounted to IKEA's Skadis board with two M8 Screws and (optionally) heat set inserts.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with PETG or ASA/ABS on standard settings (15% infil, 2-5 perimeters, no supports).
Place it on the side, so layers goes top-to-bottom, not across the piece - it should give you better durability.
You will need 2xM8 screw which you can drive directly into plastic holes but I recommend using also heated inserts.