Phone Mount Adapter for BMW F800S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter for the clip-on handlebar of the BMW F800S, to which you can attach your mobile phone holder.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Custom-made adapter for the BMW F800S (clip-on handlebars) to easily mount your phone holder.
Designed to fit into the fork bridge cutouts.
The Adapter consists of 2 main Parts and 3 Standard Parts for 1 side:
- 1x Upper Part
- 1x Lower Part
- 1x Hexagon Head Bolt: DIN 933 - M8 x 30
- 1x Plain flat washer: DIN 125 / ISO 7089 for M8
- 1x Nut: ISO 4032 - M8
The standard parts do not have to correspond exactly to the same standard, but they are the ones I used.
If you want it to look symmetrical, you can also print the parts for the other side. You'll then need the three standard parts again.
(In the modelfiles you can find the 2 Main parts for left and right. Unfortunately, I was unable to mirror the step files due to problems with my CAD software)
Print Settings:
Nozzle: 0,4mm
Layer height: 0,2mm
Infill: Upper Part: 100% Lower Part: 30%
Top Shell Layers: 8
Wall Loops: 4
Supports: Upper Part: No Lower Part: Yes
Assembly
Press the nut into the hexagonal recess of the lower part and mount the entire adapter on your motorcycle.
I hope the Adapter is useful for you.